Routster Studio
Changelog
What every published version of Studio brought, newest first. Studio is in early access, and an installed Studio offers each new minor version itself; a patch reaches it with the next one.
-
Adding a PDF map to the map archive works again on a Mac.
- Adding a PDF map to the map archive no longer closes Studio on a Mac.
- A map with no georeference is asked about before it goes into the map archive: a PDF or image map can be georeferenced there and then, and an OCAD map is best georeferenced in OCAD and added again. You can still upload a map without, but it is not recommended.
A patch: new installations get it, and installed copies pick it up with the next minor version.
-
Pinch to zoom on a trackpad.
- A pinch on a trackpad zooms the map of the club's map archive, and both maps of Georeference map, as the mouse wheel already did.
- The Modules page no longer shows itself before the module list has arrived.
A patch: new installations get it, and installed copies pick it up with the next minor version.
-
A new event starts with its map, from your club's map archive, and a momentbana gets corridors from the course and zoomed areas.
- New event is one screen that starts with the map: pick it from your club's map archive, from your own archive with Premium, or from a file, then name the event and choose its kind.
- Your club's administrators keep the maps the club sets on in its map archive. Every member can start an event from them, also offline from the copy last downloaded.
- Corridors: lay a corridor along the whole course or along the legs you choose, then edit it point by point, with curves.
- Zoomed areas: in a momentbana, show a piece of the map again at a larger scale beside the course, as a rectangle, circle, pill, freehand or round the legs you choose. Studio places it where it hides none of the course, and its lines never cross the course.
- Controls you put in a zoomed area are drawn small in its view, and keep their real places for leg lengths and routes.
-
Choose which kinds of route Route choice shows, and give each kind its own colour.
- Under Routes to show, tick the kinds you want: the fastest, along the paths, straight on, the least climb and other ways round. A kind you untick leaves the list and the map.
- Tick A colour for each kind of route to draw each kind in its own colour on the map, with the same colour beside its name in the list.
- Your choices are kept for every event.
-
Route choice on forest maps shows real choices, each named the way a runner would name it.
- After the fastest route, a forest leg shows a route along the paths, straight on, and the least climb, each only where the leg has one, and other ways round of about the same speed.
- A leg with nothing to choose between shows the fastest route alone, instead of routes bent aside to fill the list.
- The updated Route choice module names each route and says how much slower it is than the fastest.
-
The sample event shows what a momentbana can do.
- Open a sample event now opens Camp Flabanabba as a momentbana: the three courses with the full map, plus Alpha with paths hidden, Beta with contours only, and Gamma mixing both, with a circle of contours only and an area without paths along a corridor, the map faded outside it.
- Every control in the sample event has its control description, Gamma's included.
A patch: new installations get it, and installed copies pick it up with the next minor version.
-
A corridor's faded map no longer draws pale lines through the course.
- When the map outside a corridor is faded, its contours and other lines no longer show as pale streaks across the controls, numbers and legs. The faded map now lies under the course.
A patch: new installations get it, and installed copies pick it up with the next minor version.
-
Studio can cost the way between any two places on the map, and winning times on forest maps come faster.
- Studio now works out the way between any two places on the map, round lakes and through the ground as a runner goes, not only along a course. The updated control logistics module uses it to plan each helper's lap along real routes instead of straight lines.
- Winning times on forest maps are worked out faster, every leg at once.
- The control description generator reads re-entrants and spurs at the point of a contour, and suggests where the flag hangs (column G) wherever the map shows it.
-
The sample event is Camp Flabanabba, and Studio on Windows is steadier.
- Open a sample event now opens Camp Flabanabba: three courses on a made-up island map, with a map frame to look at.
- On Windows, updating, windows that open on the right screen, closing Studio's helper programs with Studio, printing on the paper that matches each page and Cancel in the sign-in window all work better.
A patch: new installations get it, and installed copies pick it up with the next minor version.
-
A control you have moved is marked until its description is checked, and forest legs show what going wide costs.
- A control you have moved since writing its description is marked on the description sheet, with a notice under it. Read the description again, or say that it still fits.
- On OCAD forest maps a leg now shows other ways round besides the best route, including wider ones, and none runs past a control and back.
- A PDF map that was printed turned reads its scale from its north lines, so routes are measured on it too.
- On the Mac, the Dock icon has a dark version for dark mode.
-
The Windows installer speaks Swedish, and Studio starts in the language you choose there.
- The Windows installer asks for your language first: English, Swedish, French or German. The first time Studio opens, it and the guide with Pip are in that language. You can still change it later under File, Program language.
- The installer and the uninstaller are in Swedish when you choose Swedish. Before, a Swedish Windows got them in English.
- On OCAD forest maps, routes are chosen on the same ground as in Routster Analyse, worked out from the times of real runners.
- A railway on a PDF sprint map is found on more maps, so it no longer blocks a route where the ground under it is open.
A patch: new installations get it, and installed copies pick it up with the next minor version.
-
The upload window fits the screen.
- Upload to Routster Analyse is never higher than your screen: what does not fit scrolls, and the window moves up when a longer page would run off the bottom. Reopened for an event you had uploaded, it could run under the Dock on a Mac, look squashed, and Add event QR to map reacted above where it was drawn.
- The QR box no longer keeps an empty line below its hint.
A patch: new installations get it, and installed copies pick it up with the next minor version.
-
An event is now one file: Studio's own settings are saved inside the event file, which Purple Pen still opens. Starts keep their descriptions through OCAD, and PDF maps are read more cleanly for routes.
- Training settings, module values and a copy of a PDF map's georeference are saved inside the event's .ppen file, so there is no second file beside the event to keep with it.
- An older event's extra files move into the event file the next time Studio saves it.
- If the event is saved in Purple Pen, Studio's settings are left out; the next time Studio opens it, it offers to put them back.
- A start's description columns D and E go to OCAD and come back, as a control's do.
- PDF maps are read with fewer stray specks blocking routes.
Every installed Studio is offered this version. An older Studio does not see the training settings of an event saved by this one, and loses them if it saves the event, so update every computer you set courses on.
-
Training maps get a steadier strip, a corridor in any area and map filters of your own. A Mac installs its updates again, and OCAD files keep more of what they had.
- The training strip sits beside the event's name when the window has room for it, and keeps its place whichever area or course you choose.
- Any momentbana area can take a corridor, and keeps its filter along it.
- Map filters of your own: the sliders beside the filter open an editor of every symbol the map uses, by ISOM group or one by one, saved under a name for later events. Each event keeps its own copy, so it prints the same on any computer.
- An area's separate Analyse layer is saved when you tick it.
- On a Mac, an update installs again when Studio was opened from the Dock or the Finder.
- OCAD files keep more on the way through Studio and back: gaps in control circles, cut legs and pictures survive, and a black text, line or rectangle no longer stops a save for OCAD.
A patch: new installations get it, and installed copies pick it up with the next minor version. A Mac on 0.16.0 or older needs this version installed by hand once; after that, updates install themselves.
-
Windows gets an installer, and PDF maps open on Windows and the Mac again.
- Windows has an installer: Studio goes in your own programs folder, on the Start menu and under Installed apps, without asking for an administrator. The zip is still published.
- An update Windows would not install no longer leaves Studio loading forever: Studio starts as it was and tells you once.
- PDF maps open again on Windows and the Mac, where the PDF converter was missing.
- PDF and image maps are read better for route choice: areas enclosed by impassable ground count as blocked, passages under canopies stay open, and houses no longer come out as holes.
-
Map flips and slingor reach Analyse as you set them, and a PDF or image map can be placed on the ground.
- A course with a map flip or map exchange is uploaded side by side, as printed, so runners can switch between the whole map and each side.
- A new training type, Slingor, and a box in the upload window to upload the courses as slingor. It starts ticked when the courses go round one point.
- Event, Georeference map places a PDF or image map by pairs of points against OpenStreetMap. Such a map can then be uploaded to Analyse and used for a test run, and its positions go out in world files, KML, GPX and IOF XML.
- An upload sends only the part of the map the courses print, with what each course prints over it: a frame, a corridor or white-out you drew, texts, lines and pictures.
- A PDF map's controls land where they should in Analyse.
- The arrow keys scroll the map.
- Route choice on PDF and image maps no longer fails on a sheet with a black border, and finds buildings drawn in a large grey.
-
Map frames, Pip's guide to a first course, and the events you had open before the last one.
- New to Studio? Pip, from Routster Analyse, guides you through a first course on your own event, from the first control to the upload to Analyse with its QR code on the map. Skip it, or replay it from Help, Guide with Pip.
- The arrow beside "Open last viewed event" on the start window lists the events you had open before it, newest first.
- Studio can run the new map frames module (Premium): a frame round the map on every course, filled in once per event and fitted to each course's paper and print scale.
- A course's objects are drawn in a fixed order, so a panel no longer covers its own text after something was removed.
- The course generator shows how long a run has taken, can be stopped, and says at once when no course can use the start or finish.
- Linux opens PDF maps from the packaged app, remembers your sign-in through the desktop keyring, and runs on Wayland without XWayland.
- A new installation shows the map at full intensity.
-
Studio tells you when a new version is ready.
- When a new version is out, Studio says what it brings and offers to restart into it. Otherwise it installs at the next start.
- Small fixes are gathered into these versions rather than sent one at a time, and every published build has its own version number.
-
OCAD course-setting projects go to OCAD and come back whole.
- Unused controls, cut circles, bent and cut legs per course, moved control numbers, and first aid and refreshment points survive the trip to OCAD and back. File, Open lists OCAD files.
- Modules can put control numbers on a course's controls, labels on the lines they draw (View, Route labels), and description symbols.
- Routes widen with the map's zoom.
-
Training maps are prepared without holding up the window.
- Training maps are prepared in the background, so the window stays responsive.
- ISOM 2000 forest maps are read in their own symbol numbers, as Analyse reads them.
-
Training maps reach Analyse as you drew them.
- Courses with a training treatment upload as the artwork Studio prints, as PDF and PNG, with a layer per area for Analyse Premium.
- An upload as a draft offers the event's QR code too.
- The window fits the screen, and F11 switches full screen on and off.
-
The event's QR code on the map.
- After publishing to Analyse, you can add the event's QR code to the map.
-
Momentbana courses.
- Momentbana courses, with circle, square and freehand areas you can edit, and area outlines as an event setting.
- Ground the map marks as out of bounds stays closed to routes.
-
Events can be saved for OCAD.
- File, Export OCAD course-setting file, or let Studio write one beside the event every time you save (File, When saving).
- A road or path no longer opens ground the map marks as out of bounds or closed.
-
Courses come in from OCAD.
- File, Import courses from OCAD brings the controls, courses and description columns D and E of an OCAD 12 or later course-setting project into the event.
- .ppen and .ocd files open in Studio by double-click on every platform.
- Score courses upload to Analyse as free-order classes.
-
Your Routster account, in Studio.
- A Routster account menu on the start window and in the editor.
- Links to the Routster websites under Help.
- Modules you have access to are ready as soon as you sign in.
-
Modules by plan, with a free trial.
- Every module comes with a plan: free, Premium or Club. Every Premium and Club module can be tried free for 30 days.
- Modules made by others can be published in the store.
- The inspector folds to its icon rail instead of squeezing a page thin.
-
A dark theme.
- A dark theme, under View, Appearance. Light stays the default.
- Control logistics makes its laps into courses you can print like any other.
-
Every tool a module, and modules anyone can build.
- Route choice, the control description generator and the scale bar are separate modules, and six more arrive: course check, difficulty check, winning time estimate, forking and following, test run and control logistics.
- Forest OCAD maps are routed with Analyse's forest router.
- The module developer kit and developer mode, for building a module of your own.
- Arrange the header's actions and the module rail yourself (View, Customize toolbar and Arrange modules).
-
Windows and Linux, and the module store.
- Studio runs on Windows and Linux for the first time.
- The module store, inside Studio.
- The quick-tool wheel, and selecting several objects at once.
- The course generator makes sets of courses.
-
The first early-access build, for the Mac.